Software platforms of 5G


Figure 10: Test bench code for WLAN Transceiver



Yüklə 2,79 Mb.
səhifə3/17
tarix22.05.2020
ölçüsü2,79 Mb.
#31356
1   2   3   4   5   6   7   8   9   ...   17
Information on 5G

Figure 10: Test bench code for WLAN Transceiver


From figure 10, txSig is the waveform, rxSig is the received waveform, rxBits is the received Bits,

rxEq is the received parametric equalizer, rxNonEq is the received parametric Non-equalizer, cfgVHTTx is the configuration parameters, txBits is the input layers which will be the transmitter bits, params is the parameters and SNR is Signal to Noise ratio.

The transceiver is represented as a single function denoted as “wlan80211axTxChRx”. The input

bits(txBits) from the higher layers and the parameters of the system are being subjected as the inputs to the transmitter function. It generates the waveform(txSig) and the configuration parameters(cfgVHTTx). The received waveform, parameters and the SNR are subject to the channel modelling(cfgVHTTx) gives you the received waveform or the channel modelling waveform. The received waveform(rxSig) from the parameters are subject to the receiver operations to give received bits(rxBits).

By comparing the received bits(rxBits) with the input bits(txBits) we can compare measures such

as BRPR and to qualify the system at different SNR values and different data rates.



Function for Transmitter operation:



Yüklə 2,79 Mb.

Dostları ilə paylaş:
1   2   3   4   5   6   7   8   9   ...   17




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©www.azkurs.org 2024
rəhbərliyinə müraciət

gir | qeydiyyatdan keç
    Ana səhifə


yükləyin